Highlights
The MJ255A AI Vision Optimizing Cross-Cut Saw System combines the MJ255 NC quick cross-cut saw with the QEC504A high-end transverse vision scanner. The scanner automatically measures each board, identifies visible wood defects, grades the material and calculates an optimized transverse cutting path. The MJ255 then completes fast and accurate automatic cross-cutting according to the generated cutting plan.
The system is designed for finger-joint material preparation, glulam production, solid wood component cutting and automated production lines requiring defect removal, length optimization, grading and sorting. It can also be connected with four-side moulders and downstream sorting equipment.
- Processing direction: Transverse cross-cutting
- Main models: MJ255 + QEC504A
- Saw working width: 20–220 mm
- Saw working thickness: 10–95 mm
- Scanner working width: 20–200 mm
- Scanner working thickness: 12–80 mm
- Maximum saw feed speed: 180 m/min
- Maximum scanner feed speed: ≥120 m/min
Images
Features
- Four customized high-speed full-color 4K line-scan cameras detect wood defects, measure board dimensions and provide accurate data for optimized cutting decisions.
- The professional optimization software calculates transverse cutting paths according to defect positions, board dimensions, grading requirements and finished-component specifications.
- The MJ255 NC cross-cut saw reaches feeding speeds of up to 180 m/min, with a sawing cycle of 0.15–0.3 seconds for high-volume solid wood production.
- Automatic scanning, optimization and cutting reduce manual marking, manual handling and operator dependency while improving timber yield and production safety.
- The system supports grading, sorting, production traceability and integration with four-side moulders, sorting systems and automated stacking equipment.
Technical Data
| Specifications | Unit | MJ255 |
|---|---|---|
| Processing material | — | Softwood or hardwood |
| Feed length | mm | 400 to unlimited |
| Feed width | mm | 20–220 |
| Feed thickness | mm | 10–95 |
| Feed thickness tolerance | mm | ±3 |
| Maximum board curvature | mm | 10 |
| Shortest cut-off length | mm | 80 |
| Cutting tolerance | mm | ±1–1.5 |
| Maximum feed speed | m/min | 180 |
| Sawing cycle speed | s | 0.15–0.3 |
| Total motor power | kW | 19 |
| Feed motor | kW | 5.5 servo motor |
| Lift saw motor | kW | 4.5 servo motor |
| Outfeed motor | kW | 0.75 |
| Pressure wheel lifting motor | kW | 0.37 |
| Operating voltage | — | 3-phase AC 380 V / 50 Hz |
| Working air pressure | MPa | 0.4–0.8 |
| Dust exhaust ducts | mm | 2 × Ø120 |
| Required exhaust speed | m/s | 30 |
| Overall dimensions | m | 6.4 × 1.5 × 1.78 |
| Machine weight | kg | 1,800 |
| Specifications | Unit | QEC504A |
|---|---|---|
| Working width | mm | 20–200 |
| Working thickness | mm | 12–80 |
| Minimum feed length | mm | 500 |
| Maximum feed speed | m/min | ≥120 |
| Air pressure | MPa | 0.3 |
| Total power | kW | 1.2 |
| Overall dimensions | cm | 580 × 200 × 210 |
| Machine weight | kg | 700 |
| Software | — | Professional high-grade software |
| Cameras | — | 4 customized full-color 4K line-scan cameras |
| Industrial touchscreen | — | 27-inch, i7 / 16G / 512G, dedicated graphics card |
| Recommended wood species | — | Suitable for all wood species |